Home > Wooden Speakers > Why the speaker cable of a high-fidelity amplifier should not be too long

Why the speaker cable of a high-fidelity amplifier should not be too long

2021-05-31 419

Generally, for long-distance power transmission, either increase the wire diameter of the speaker cable or increase the output voltage, but when the voltage is increased, the signal reduction will also decrease, and high fidelity cannot be achieved! Then try to extend the length of the front-end signal cable and shorten the speaker cable. High-fidelity is to achieve "lossless" as much as possible, so the wire diameter is increased and the distance is shortened. Generally, the audio cable of high-fidelity audio does not exceed 3 meters, and there is a thick anti-interference layer outside the audio cable for high security True (HIFI). One is that no matter how good the material is, all the wires of the loudspeaker will suffer losses if they are long. In other words, long speaker wires are like resistors.


Why the speaker cable of a high-fidelity amplifier should not be too long


The second is that the damping coefficient of the audio decreases after the audio cable is long. The most direct impact on the loudspeaker is the bass part. Because the low frequency energy in the audio signal is relatively large, the damping coefficient decreases and the bass will disperse.
Do you still want to continue reading:
The real reason for the aging of the loudspeaker battery
Wooden Speakers:https://www.zeshuiplatform.com/
Like to share
If you like our information, please share to your friends know.
Tags: Wooden Speakers

0

Links:
Website building SEO absorbing material USB Microphone CN ZeShui Passive Speaker Bluetooth Speaker Usb fan Ketone Breath Meter
Service:
Amazon Shopee USB Microphone Computer Microphone Wooden Speakers Wooden Headphones Absorbing Material Shielding Material
Shenzhen ZeShui Trading Co., Ltd. All rights reserved ©2021